How to Install Kitchen Cabinets in Englewood Like a Pro

Installing kitchen cabinets in Englewood like a pro requires careful planning and the right tools. Here’s a step-by-step guide to help you achieve professional results:

Preparation

1. Remove old cabinets and clean the area thoroughly
2. Locate and mark wall studs using a stud finder
3. Install a level ledger board to support base cabinets
4. Gather necessary tools:
   • Tape measure
   • Level (6-foot recommended)
   • Power drill and drill bits
   • Screwdriver
   • Circular saw
   • Jigsaw
   • Clamps
   • Shims

Installation Process

Installing Base Cabinets

1. Start with corner cabinets
2. Remove doors and drawers to make cabinets lighter
3. Position the cabinet and check for level
4. Shim as necessary to ensure the cabinet is level and plumb
5. Secure the cabinet to wall studs using 3-inch #10 screws
6. Install remaining base cabinets, ensuring they’re flush and level with each other
7. Use clamps to hold cabinets together while attaching them

Installing Wall Cabinets

1. Mark the height for wall cabinets on the wall
2. Install a temporary support ledger to help hold cabinets in place
3. Begin with corner cabinets, if applicable
4. Lift cabinets into place, checking for level and plumb
5. Secure to wall studs using appropriate screws
6. Install remaining wall cabinets, ensuring they’re aligned and level

Finishing Touches

1. Install filler strips where needed
2. Adjust doors and drawers for proper alignment
3. Install hardware (handles and pulls)
4. Caulk gaps and touch up any scuffs or marks

Pro Tips

• Always work with a partner when lifting and positioning cabinets
• Use a laser level for precise alignment across multiple cabinets
• Don’t fully tighten screws until all cabinets are in place and aligned
• Consider using a router for custom cuts around outlets or pipes

By following these steps and using the right tools, you can install Englewood kitchen cabinets with professional-looking results.