How to Properly Apply Decorative Concrete Sealing in Bayshore Gardens

Properly applying Bayshore Gardens decorative concrete sealing involves several key steps to ensure a durable and attractive finish:

Surface Preparation

1. Clean thoroughly: Remove all dirt, oil, grease, and existing sealers using a pressure washer (2500-3000 PSI).
2. Repair cracks and holes: Fill any imperfections with a concrete patch product.
3. Etch the surface: Use an etching solution like EAGLE ETCH & CLEAN to create a porous surface for better sealer adhesion.

Sealer Application

1. Choose the right sealer: Typically, solvent-based acrylic sealers work best for outdoor stamped concrete.
2. Check weather conditions: Apply when temperatures are between 50°F and 95°F, with low humidity and no rain in the forecast.
3. Apply thin coats: Use a sprayer, roller, or painter’s pad to apply multiple thin layers rather than one thick coat.
4. Allow proper drying time: Wait about 2 hours between coats, and follow manufacturer’s instructions for full curing time.

Tips for Success

• Perform a small test area first to ensure desired results.
• Use a 3/8 nap microfiber roller for even application.
• Apply a second coat in the opposite direction of the first for better coverage.
• Ensure proper ventilation and wear protective gear during application.

By following these steps, you can achieve a professional-looking decorative concrete seal in Bayshore Gardens that enhances and protects your concrete surface.